Reloading Accessories

DUOMATIC 375C TOOLING SET 10, 12, 16, 20, 28, 410ga.This complete tooling set can be installed in any 375 machine.The 10ga. Tooling also comes with an extra piece, it is a Special Tapering Tool - after final crimping the 10ga. shell you knock it out, place the shell on the loading plate underneath the Special Taper Tool to give the shell a taper. NOTE:  Toolhead included in 10 gauge tooling set.

800 DIE REMOVAL SYSTEMNew from Ponsness Warren is a die removal system for all 800 series reloaders.The new "800 Die Removal System" is the same system we use on the new "800Plus" and "Patriot" reloaders.This kit allows for the easy removal of shells from virtually any station on the reloader.  Now you can quickly check shot and powder charges, inspect shells, or easily remove damaged shells.All kits are pre-timed at the factory and consists of the following parts:Die Removal CylinderMain...

800 Plus Tooling Kit -  12, 16, 20, 28, 410ga. Another great feature of the 800 Plus is the quick-changing tooling kits. Since the 800 Plus does not have a center shaft, these tooling kits are installed in a tool head, allowing you to convert to another gauge and without the need to re-adjust any of the crimping stages.MAY TAKE TWO MONTHS TO PROCESS AT THIS TIME

900 "ELITE" TOOLING SET -  12, 16, 20, 28, 410ga. This tooling set allows you to easily convert any Platinum 2000 or 900 to reload another gauge. Changing gauges is done quickly, with easy-to-follow instructions included.   You can also update your 950 Elite from the "shell holders" to the full length dies with this 900 tooling kit - you will need two extra pieces for the knock out area - the knockout spring (Duom130200) and a new knockout shaft (Size130500) - You will be...

Spend less time reloading and more time shooting! Mount this system to your machine and shells will automatically be placed on the shell seating post. The large shell hopper holds 500 empty shells and feeds them brass-down onto the shell feed seating assembly. The electric motor, which turns the sorting disc in the hopper, is equipped with a micro-switch, stopping the motor automatically when the feed tube is full. 12 Gauge only MAY TAKE SEVERAL WEEKS FOR DELIVERY AT THIS TIME-CALL FOR MORE...

DIE REMOVAL SYSTEM (900/950 SERIES)Update your older reloader with this Die Removal System.  This system allows you to easily remove shells during the reloading process for checking shot or powder weights, inspecting shells, etc.Lift a die pin and slide out the shell - it's that easy!The cylinder is made of "grivory", a new compound designed to be stronger and more rigid than aluminum.  This new Die Removal Cylinder is built taller, making it much easier to place it in the neutral...

AUTO-DRIVE for DILLON (RL 1050) The AUTO-DRIVE is easily operated by pressing down on foot pedal. The full pivoting system allows the arm to work in one continuous motion. If you need to reverse the system, simply flip the toggle switch to reverse and press the foot pedal. The AUTO-DRIVE comes fully assembled and mounted on the steel base. All mounting holes are pre-drilled. PLEASE NOTE: The RL 1050 AUTO-DRIVE system is available with your choice of gearhead speed and foot/hand operation. 900...

AUTO-DRIVE for DILLON (XL 650) The AUTO-DRIVE is easily operated by pressing down on the foot pedal. The full pivoting system allows the arm to work in one continous motion. If you need to reverse the system, simply flip the toggle switch to reverse and press the foot pedal. The AUTO-DRIVE comes fully assembled and mounted on the steel base. All mounting holes are pre-drilled. PLEASE NOTE: The XL650 AUTO-DRIVE system is available with only one choice of gearhead speed and hand/foot operation....

CANVAS DUST COVER - LargeThis large, durable, heavy-weight canvas cover keeps dirt and dust off your reloader while not in use.Easily slips on and off.  This cover has been redesigned with a velcro cover so that it can also cover most of your accessories.Fits all 800B, 800C, 800Cvt., 900, 950, Plat2000, 800Plus and Patriot machines

CANVAS DUST COVER - SMALL - 375 MACHINEThis small, durable, heavy-weight canvas cover keeps dirt and dust off your reloader while not in use.Easily slips on and off, and is available for all 375 Ponsness/Warren machines.

CANVAS DUST COVER - FOR L/S-1000This large, durable, heavy-weight canvas cover keeps dirt and dust off your reloader white not in use.Easily slips on and off - for L/S-1000 only

Heavy-duty ergonomic handle provides maximum leverage and comfort. Made for the Patriot reloader but, fits on most Old 800 Series, 900, 950, Plat2000 and New 800 series machines.

EZ-FILL ACCESS HOPPER (ALUMINUM) ASSEMBLY This large, divided hopper holds more than 25 pounds of shot, and over a pound of powder.  Bushing access holes allow you to quickly change shot and powder bushings without draining and removing the hopper.  This updated design is more than 12 inches shorter than our standard (large tube) bushing access plate, making it easier to fill.  Adapts to most Ponsness/Warren progressive reloaders. ...

SHELL CHUTE FRONT You will have easier access to your finished shells with this NEW front shell chute. Fits all of our progressive reloaders.

These Lead Shot Bushings are for the L/S-1000 only - if you are looking for bushings for your Duomatic 375, Old 800 Series, 900 Series, 950 "Elite", Plat2000, 800Plus or Patriot PLEASE ORDER FROM THE STANDARD SHOT BUSHINGS

These Ponsness Warren bushings are for the L/S-1000 only. They are a bigger bushing and will not fit any other machine.

L/S-1000 TOOLING SET Allows you to easily convert the L/S-1000 over to 10 or 12 gauge.   10 gauge tooling is set-up complete for 3-1/2" shells12 gauge tooling is set complete for 2-3/4" and 3" shells  MAY TAKE TWO MONTHS TO PROCESS AT THIS TIME

AUTO-DRIVE for P/W - HAND This new, easy-to-install unit is super quiet when operating. The AUTO-DRIVE features a smooth, heavy-duty electric motor that has a built-in brake system, making sure the system will stop instantly, with no creep or other unwanted movement. The actuating arm is equipped with a slip-clutch system, allowing it to slip or stop under too much pressure. The AUTO-DRIVE is easily operated by pressing down on the foot pedal. The full pivoting system allows the arm to work in...

AUTO-DRIVE for P/W - FOOTThis new, easy-to-install unit is super quiet when operating. The AUTO-DRIVE features a smooth, heavy-duty electric motor that has a built-in brake system, making sure the system will stop instantly, with no creep or other unwanted movement.The actuating arm is equipped with a slip-clutch system, allowing it to slip or stop under too much pressure. The AUTO-DRIVE is easily operated by pressing down on the foot pedal.The full pivoting system allows the arm to work in on...

PATRIOT TOOLING - 12, 20, 28ga. This complete tooling set can be installed on any Patriot machine.Instructions included NOTE: not available in 410ga.

SHELL CHUTE REARYou will have easier access to your finished shells with this NEW rear shell chute.Fits all of our progressive reloaders.

SHOT & POWDER BUSHING KITThese kits consist of the 10 most widely used bushings in clay target shooting.Bushings are pakaged in a foam lined, clear container -- allowing for easy identification and storage.12ga. includes: #5, #5.5, G, G1, I, J, J1, K, L and M20ga. includes: #3, #5, D1, E, E1, E2, F, F1, F2 and G28ga. includes: 3A, A, C, C1, D, D1, E, E1, E2 and F-POWDER BUSHINGS ONLY!! ...

These Ponsness Warren bushings fit the Duomatic 375, 900 Series, 950 Elite, Plat2000 and all of the 800 Series. They will fit all Ponsness Warren reloaders except for the L/S-1000 Machine  ...